 |
Optics Division
Sample Beamsplitters
Product Information
PBF02A Optically Flat Beamsplitters and PBS02A beamsplitters are intended for use specifically inthe visible wavelengths at 45°.
- Large angular aperture
- Clean polarization state that is fully compatible with the analyzer polarizer
- No stress birefringence in reflection
- Very high image contrast
| Beamsplitter Products |
Typical Polarizer Performance | ||||
|---|---|---|---|---|---|
| 45° Angle of Incidence | |||||
| Tp | Ts | Rs | Rp | ||
| PBF02A PBS02A |
450nm | 84.6% | 0.33% | 88.8% | 4.50% |
| 550nm | 88.4% | 0.19% | 88.8% | 3.38% | |
| 650nm | 89.0% | 0.13% | 86.8% | 2.97% | |
Part Information
Dimensions:Sample parts are 32mm x 28mm.
Dimensions have a tolerance of +/- 0.20mm.
PBS02A beamsplitters are 0.7mm thick on a display grade glass substrate.
PBF02A beamsplitters are 1.6mm thick on an optically flat substrate.
Transmission Orientation is parallel to the long side
Visual Inspection:
All sample parts will be inspected to Visual Quality Grade 2
Clear Aperture:
Parts are only inspected within the clear aperture. This is the useable area of the part. The
clear aperture is the part minus an edge exclusion on each side. Sample parts have an edge
exclusion of 2mm.